Home >

Products >

 Control System
Control System
  • ※ Makes the module ideal for standard and electronic engine applications

    ※ Provides multiple installation options.

    ※ Tracks the amount of fuel being used and sounds an alarm if over/under fuel use is detected.

    ※ Provides secure and simple off site monitoring

    ※ Provides clear accurate power measurement information

    ※ Provides current and historical status information.

Keywords: DSE | ComAp | Smartgen Genset Automatic Control Module


Made in U.K Deep Sea Controller

WALT provides original Deepsea control module ( made in UK),which have Auto Mains (Utility) Failure functions suitable for different variety of single gen-set applications whatever is diesel or gas.

It can monitoring an extensive data of engine parameters, modules display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem).



KEY FEATURES

KEY BENEFITS

CAN and magnetic pick-up sensing

Makes the module ideal for standard and electronic engine applications.

Configurable inputs/outputs (11/8).

Provides multiple installation options.

Fuel usage monitor and low level alarms

Tracks the amount of fuel being used and sounds an alarm if over/under fuel use is detected.

Remote communications (RS232, RS485, Ethernet, Modbus, RTU/TCP).

Provides secure and simple off site monitoring. All ports are continuously active.

Configurable event log (250).

Provides access to historical alarms and operational status.

Integral PLC editor.

Ensures additional applications are easily integrated into the system.

Power monitoring (kW h, kVAr, kv Ah, kV Ar h), reverse power protection, kW overload protection.

Provides clear accurate power measurement information.

Load switching, load shedding & dummy load outputs

Allows load options and dummy load requirements to be independently controlled.

Data logging (HDD/USB).

Provides current and historical status information.

DSE Configuration Suite PC Software.

Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.

Tier 4 CAN engine support.

Ensures the control module can be used with the latest in modern electronic engine technology.


Made in Czech ComAp Gen-set Controller

WALT provides original Czech ComAP auto mains failure next gen-set controller ,which suitable for a different variety of single or multiple gen-set applications whatever diesel or gas.

It can monitoring an extensive data of engine parameters, modules display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem).




ComAp Controller Key Features

Single gen-set controller for stand-by and prime power applications

Flexible event based history with up to 350 events

Direct communication with EFI engines

Load shedding, dummy load capability

Total remote monitoring and control

Tier 4 final support

Easy to install, configure and use

Automatic temperature based cooling/heating

Wide range of communication capabilities including:

Comprehensive gen-set protections

• connection via RS232, RS485, CAN and on board USB

Multipurpose flexible timers

• internet access using Ethernet, GPRS or 4G

True RMS measurement

• support for Modbus and SNMP protocols

Available also in low temperature (LT) version

Internal PLC support with PLC editor and monitor included in LiteEdit

Cloud-based monitoring and control via WebSupervisor

SNMP traps

Active SMS and emails in different languages

Geofencing and tracking via WebSupervisor

2× 10 A binary outputs for cranking and fuel solenoid

Option for up to 16 additional binary inputs/outputs


Made in China Smartgen Gen-set Controller

WALT provides original China Smartgen auto mains failure gen-set controller ,which suitable for a different variety of single gen-set applications.
It is integrating digital, intelligent and network techniques, used for automatic control system and monitor of diesel generator. It has functions of controlling genset start/stop automatic, data measuring, “remote controlling, remote measuring, remote communication” and protection alarm. The controller equip with bigger LCD display, Chinese and English option display. It is easy operation and reliable running.

It applies for microprocessor technique which can carry out precision measure, constant value adjustment, timing and threshold setting and etc. Most of parameters can be adjusted via panel of controller while all parameters also can be set, adjusted and monitored via PC by USB port or RS485 port. It can be widely used in all types of generator automatic control system for its compact structure, advanced circuits, simple connections and high reliability.


Smatrgen Controller Key Features

X32 ARM CPU used, high integration of hardware and more reliable;

132x64 LCD with backlit, Chinese, English or other languages display, gentle press button for operation;

Acrylic materials used for protecting LCD screen,wear and scratch resistant performance is better

Silica gel panel and push buttons used more strong ability of adapting high-low temperature;

Has RS485 communication port and “remote controlling, remote measuring, remote communication” functions by the ModBus protocol. (which controller has RS485 port only)

With SMS (Short Message Service) function. When genset is alarming, controller can send SMS automatic to max. 5 telephone numbers. User can control or check genets by sending Short Message (which controller has GSM port only)

Has CANBUS port and can communicate with J1939 genset (which controller has CANBUS port only)

Suitable for various system of 3-phase 4-wires, 3-phase 3-wires, 1-phase 2-wires, and 2-phase 3-wire (120/240v) power, 50/60HZ

Senses and shows gens or mains’ 3-phase voltage, current, and power, frequency

For Mains, controller has over and under voltage, over and under frequency, loss and anti-phase functions; For gens, has over and under voltage, over and under frequency, loss and anti-phase, over and anti-power, over current functions

3 fixed sensors (temperature, oil pressure and level);

2 configurable sensors can be set as sensor of temperature or fuel level

Precision measure and display parameters about Engine,

Control protection, Start & Stop genset, ATS(Auto Transfer Switch) control automatic, and has complete failure protection function;

All output ports are relay-out

User can modify parameters and store them in internal FLASH memory; the parameters setting cannot be missed even without power; most parameters can be set via panel of controller; and all parameters can be set via PC, which connected with USB or RS485;

More kind of curves of temperature, pressure, fuel level can be used directly and users can define the sensor curve by themselves also

More successful start conditions (speed sensor, oil pressure, generator frequency) are optional;

Widely power supply range (8~35VDC), accommodating to different battery voltage starting environments;

With functions of event logs, real-time clock, start & stop generator timing (can be set as start genset once a day/weekly/monthly whether with load or not);

Can be used in pumping sets, and using as indicating meters also (indicating and alarming only, outputs is inactive)

Have timing maintenance function. Actions (warning only or alarming stop) can be set when maintenance time up

All parameters used digital modulation and instead of analog modulation which using conventional electronic potentiometer. More reliability and stability.

Modular design, anti-flaming ABS plastic shell, inserted type connection terminals and built-in mounting. Structure compact with easy mounting.


Other Models Genset Controller, a rerepresentative can be reached through our contact page or email us sales@waltpower.com

Other Genset Accessories: ATS, Sychronization System, Cooling System, Bunded Fuel Tank

TALK TO US 24/7/ 008618717996108
Call us now!
LIVE CHAT
GET IN TOUCH
   ENQUIRE NOW