WALT POWER delivered a 600kW/750kVA Cummins open-type diesel generator to Malaysia.
The generator, model WGP-C750, was equipped with a Cummins QSK19 diesel engine, Stamford alternator, and SmartGen generator controller, configured for 415V, 50Hz, three-phase power.
This type of industrial diesel generator is suitable for applications such as large factories, manufacturing facilities, and commercial buildings requiring high-capacity standby or prime power, subject to the generator's confirmed power rating and operating conditions.
Generator Specifications
| Specification | Details |
|---|---|
| Generator Model | WGP-C750 |
| Output Power | 600kW / 750kVA |
| Voltage | 415V |
| Frequency | 50Hz |
| Phase | Three Phase |
| Diesel Engine | Cummins QSK19 |
| Alternator | Stamford |
| Generator Controller | SmartGen |
| Generator Type | Open Type |
| Fuel Tank | Base fuel tank specified for 6-hour operation |
Generator Configuration
This 750kVA Cummins diesel generator was supplied in an open-type configuration.
The Cummins QSK19 diesel engine was paired with a Stamford alternator to provide three-phase electrical power at 415V and 50Hz.
A SmartGen controller was included for generator monitoring, protection, and operational control.
For industrial facilities requiring automatic standby power, an appropriately rated automatic transfer switch (ATS) can be integrated with a compatible generator control system.
The actual generator starting time and ATS transfer sequence depend on the controller settings, generator readiness, and electrical system design.
Installation Considerations for Industrial Diesel Generators in Malaysia
For large diesel generators operating in Malaysia or other tropical regions, ambient temperature, ventilation, and site conditions should be considered during equipment selection.
High ambient temperatures can affect engine cooling performance and available power output. The actual derating requirements depend on the engine manufacturer's specifications and installation conditions.
For open-type generators installed inside a generator room, adequate cooling airflow, hot-air discharge, combustion air supply, and maintenance access are particularly important.
These considerations should be reviewed during project planning rather than assuming that a generator's standard rated output will be available under every site condition.
Selecting a 750kVA Cummins Generator for Industrial Applications
When selecting a 750kVA Cummins diesel generator for an industrial project, buyers should confirm whether the required capacity refers to prime power (PRP) or emergency standby power (ESP).
Other important factors include the expected operating hours, electrical load profile, motor starting requirements, site temperature, and installation conditions.
For projects involving large motors or substantial starting currents, generator sizing should account for the starting characteristics of the connected equipment, not just the total running load.
At WALT POWER, we help overseas importers, distributors, and project contractors select diesel generator configurations based on their actual power requirements and operating conditions.
For additional models and available configurations, explore our Water-Cooled Diesel Generator Series
For quotations or technical specifications, please contact WALT POWER at .
